Fabtech 6" suspension lift for Nissan Titan - Installation
Click here for Fabtech lift installation instructions
Page 2 Page 3 Page4 Page5 Page6 Page7 Page8 Page9 Page10
1. Jack up the front end of the truck and support the frame rails with jack stands. Remove the front tires.
2. Remove the OEM differential skid plate and discard. If equipped with bumper to crossmember skidplate, remove.
3. Disconnect tie rod ends from steering knuckle.
4. Remove sway bar end links. Discard end links.
Tie rods, sway bar end links and skid plates have been removed in this pic.
5. Remove brake caliper. Remove brake rotor. Unplug ABS wire from connector near the upper control arm.
6. Remove cotter pins & CV axle nuts.
7. Remove upper & lower ball joint nuts. Remove spindle from upper ball joint, then CV axle from hub bearing, then lower ball joint.
8. Remove hub assembly from OEM spindle.
9. Remove the three upper strut assy mounting bolts, remove lower shock bolt, remove strut assembly.
10. Remove CV axle.
Spindles, shocks & coil springs, and axles have been removed in this pic.
Page 2 Page 3 Page4 Page5 Page6 Page7 Page8 Page9 Page10