Fabtech 6" suspension lift for Nissan Titan - Installation
Click here for Fabtech lift installation instructions
Page 1 Page 2 Page 3 Page5 Page6 Page7 Page8 Page9 Page10
25. Attach bump stop mount to crossmember, mark
where upper mounting hole needs to be drilled. Remove bump stop mount.
Drill a 3/8" hole in the frame & mount the bump stop mount using the supplied
nut tab (nut welded to an L bracket).
Here the lower control arms are reinstalled, and the new bump stop extension is mounted.
The bump stop is mounted with 3 bolts - the single bolt at the top requires a
3/8" clearance hole to be drilled into the OEM
bump plate. If you've ever had your truck off-road, the bump plate void
will be filled with stuff - and it's not easy to clean out.
Passenger side bump stop extension.
Views from the front and front side:
It's worth noting that the Fabtech instructions never tell you to re-install the
front diff vent line, nor does the kit include
the necessary extensions to allow the vent line to reach. Out comes the
spare parts bin...
Page 1 Page 2 Page 3 Page5 Page6 Page7 Page8 Page9 Page10